San Fernando PP AVR Replacement

Open New 21 days left CaliforniaManufacturingrfq
Nov 18, 2026
Dec 9, 2026 4:00 PM
Manufacturing
rfq
335314

Key questions

When is this bid due?

Responses are due December 9, 2026 at 4:00 PM (local agency time). That is 21 days from today.

Where is the work?

Los Angeles, California. It is listed with other open California government bids on BidsNexus.

Who can bid?

No set-aside is listed on the notice. Check the solicitation documents for vendor registration and eligibility requirements.

What NAICS code applies?

NAICS 335314 (Manufacturing).

What kind of solicitation is it?

Request for Quote (RFQ) in the Manufacturing category.

How do I respond?

Responses go through the agency's official posting on ersp.ladwp.com. BidsNexus links to the original solicitation and its documents; a free account shows the link and emails you similar bids.

AI Summary
The Los Angeles Department of Water and Power (LADWP) is seeking bids for the replacement of the San Fernando Power Plant's Automatic Voltage Regulator (AVR) system. This is a one-time purchase for a Basler Digital Exciter System, including a digital excitation controller, rectifier bridge, and associated accessories. Vendors must submit their bids electronically through the LADWP's eRSP system by the specified deadline.
Line Items
ItemQtyUnitEst. Unit PriceEst. TotalCategory
Basler Digital Exciter System, consisting of digital excitation controller, fan cooled rectifier bridge assembly, complete with accessories listed below, mounted, wired and tested in a NEMA 1 Control/Rectifying cubicle - with a new power potential transformer (PPT) rated for 240 Volt, 3 phase, 60 Hz input - for use with a static synchronous generator with main field requirements of up to 32 Amperes at 210 Volts at rated load and power factor. The DECS-250E-CN1SN1NA has a continuous current rating of 50 amperes, with a 10 second forcing rating of 72 amperes at 302 volts - for operation at ambient temperatures to 40 degrees celsius at altitudes to 1000 meters. The quoted static excitation system includes: Power Potential Transformer Measuring approximately 31"W x 14"D x 12"H, PPT rated 12.7 kVA, 3 phase, 60 Hz, Type AA, 200 degree Celsius Insulation, 120 degree Celsius Rise, Primary: 240 Volts, Wye, 10 kV BIL, Secondary: 240 Volts, Delta, 10 kV BIL NEMA 1 Excitation Control/Rectifying Enclosure, measuring approximately 36"W x 90"H x 36"D and weighing approximately 1400 lbs., and subject to final engineering review, containing: DECS-250E-CN1SN1NA digital regulator, with the following features: Optional Features Selected: 120Vac/125Vdc Control Power 50 Adc Excitation Current continuous capacity Standard Features: Voltage Regulation 0.25%, true RMS sensing Dual Setting Groups Generator voltage soft-start Generator to bus voltage matching Underfrequency limiting Under excitation limiting Over excitation limiting On-Line and off-line modes Five (5) point plotted limiter curve Takeover Style Stator Current Limiter Field Current Regulator (includes soft-start also) Field Voltage Regulator Var and Power Factor Regulator Var Limiter Stator Voltage Limiter Metering, real time at local LCD or at personal computer Preposition setpoints (maintain or release) Setpoint position indication IRIG-B Time Synchronization Communication RS-485 port (ModBus#) USB Port Modbus# RTU CANBUS Ethernet (ModBus# TCP 100 base T) Protection Generator overexcitation (24) Sync check (25) Generator over/under voltage (27/59) Generator Reverse Power (32R) Generator Reverse Vars (40Q) Generator over/under frequency (81 O/U) Field over current (51F) Field over voltage (59F) Rotating Diode Fault Detector (ripple detector) Failure to build voltage Loss of voltage sensing Regulator power input failure Control Front panel keypad switches Alarm and Status contact outputs: Start/Stop Limiter Active Alarm Manual Mode Unit Trip (Pole Slip) Field Flash Active Pre-position Active Contact Inputs for Remote Operation: Auto Mode Manual Mode Setpoint Raise Setpoint Lower Pre-position 1 Pre-position 2 52L/M 52J/K Auto Transfer Alarm Reset BESTCOMSPlus Software - compatible with MS Windows# with features including: Oscillography (COMTRADE compatible) Sequence of Events Recording Real-Time Metering Analysis Trending (up to six parameters) Integrated Programmable Logic Screens Self-Tuning for AVR Gain Parameters Ethernet Jack Provisions for Remote Control 120 Vac / 125 Vdc Control Power with Power Module Basler Electric BE1-64F, Ground Fault Relay AC Contactor Fused 3 phase power input Shaft Suppression Module PT/CT Test Block Cubicle light and Convenience outlet, GFCI protected One (1) duplex receptacle for 120 Vac station-fed power Strip Heater with Thermostat Standard Factory Tests One Set BESTCOMSPlus Software - compatible with Windows Operation and Maintenance Instruction Books with "As-Built" Drawings in digital format Machine Data: Hydro turbine-generator rated 3500kVA, 4.8kV, 0.8 PF, 60 Hz Generator Field Excitation Rating: 210 Vdc, 32 Adc "BASLER DIGITAL EXCITATION CONTROL SYSTEM, DECS-250E - CN1SN1NA" 2 EACH — — Basler Digital Exciter System
DECS-250E - CN1SN1NA digital regulator 1 EACH — — Digital Regulator
BRIDGE INPUT FUSES - BASLER PART NO. 43781 3 EACH — — Fuses

Want the full details?

Sign up free to see the agency name and the original bid posting link, plus contracting-officer contacts and AI response outlines. Every feature is free through December 31, 2026.

Email me bids like this every morning
We found 116 open Manufacturing bids in California like this one.
Free. No password. One click in the email to start, unsubscribe any time. Have an account? Log in

Browse More Bids

Bids in CaliforniaManufacturing BidsRFQ BidsClosing Soon All Bids